Cube Filters
Polyester cube filters are ideal for use in multi-stage spray booths. Constructed with high performance environmentally safe, polyester media. Cube filters are tear resistant and won’t rupture before or after installation. The cube configuration in each filter results in even airflow, full inflation and minimal resistance. Deep pockets allow for optimal paint holding capacity and protracted service life. Typical applications include industrial and automotive spray booths, powder coating operations, HVAC, and a variety of additional industrial uses.
Series CC50
The Series CC50 extended surface cube filter is AFT’s economical solution for paint overspray collection applications. Made from 100% polyester, the dual density, single ply media is heat-sealed to a heavy gauge metal support frame and forms a self seal when installed.
- Low initial resistance with high paint holding capacity.
- 98.9% Efficient.
- Easy to handle self-supporting design.
- Headered version also available.
Series CC99
The Series CC99 extended surface cube filter is AFT’s high capacity and economical solution for paint overspray collection applications. Made from 100% polyester, the media consists of a 1″ coarse layer to facilitate overspray collection and retention, combined with a second layer designed to trap finer paint particles. It is heat-sealed to a heavy gauge metal support frame and forms a seal when installed.
- High paint holding capacity.
- 99.6% Efficient.
- Easy to handle self-supporting design
- Headered version also available.
Series E75
The Series E75 extended surface pocket filter is AFT’s high efficiency overspray collection products. Constructed of 1″ synthetic overspray media, this product provides maximum service life while maintaining optimal removal efficiency (over 99%) and air flow. Made from recycled polyester fibers, the E75 is sewn and heat-sealed to a heavy gauge metal support frame. This sturdy combination results in a filter with low initial resistance and high holding capacity.
- Excellent holding capacity and removal efficiency (99%+).
- Low initial static pressure (0.06″-0.12″ w.c).
- Keeps filter plenum and fans clean.
- Made in the U.S.A. from recycled materials.
- Low unit cost.
Series E12H
The Series E12H extended surface pocket has the benefits of the standard E12 cuber while increasing the average removal efficienncy with the introduction of a final downstream layer of high efficiency polypropylene skin. The substantial holding capacity and construction using recycled fibers makes the E12H one of the most economical, high-efficiency overspray collectors in the marketplace.
- High particle removal efficiency (99.79%).
- Excellent holding capacity (8 lbs. per filter).
- Low initial static pressure (0.06″ w.c.).
- Made in the U.S.A. from recycled materials.
Series CC100
The Series CC100 extended surface cube filter is AFT’s extra high capacity solution for paint overspray collection applications. Made from 100% polyester, the media consists of a 1″ coarse dual layer to facilitate overspray collection and retention, combined with a second layer designed to trap high volumes of finer paint particles. It is heat-sealed to a heavy gauge metal support frame and forms a seal when installed.
- Best suited for “dry type” paint overspray collection.
- Extra high paint holding capacity.
- 99.8% Efficient.
- Headered version also available.
Series CC400 and CC500
The Series CC400 extended surface 2 pocket cube filter is Air Flow Technology’s high capacity/high efficiency solution for paint overspray collection applications. Constructed of two heavy duty layers of environmentally protective 100%% polyester media, the two pocket filter is precision sewn to a heavy gauge metal support frame. This sturdy combination results in a filter that has low initial resistance, high paint removal efficiency, and extremely high paint holding capacity.
- Quick-dry, water-based, or small particle paint overspray.
- Ideal for two stage filter systems.
- Any high volume finishing systems including bake coatings and plural component finishes.
- Over 70% efficient at 1.0µ.
- Low initial resistance (0.07″ w.c. at 150 FPM).
- 99.85% Average Arrestance Efficiency.
Series CCPC
The Series CCPC extended surface cube filter is AFT’s high efficiency overspray collection powder paint product applications. Made from 100% polyester, the media consists of a 1″ coarse layer to facilitate overspray collection and retention, combined with a second layer designed to trap finer paint particles. It is heat-sealed to a heavy gauge metal support frame and forms a seal when installed.
- Extremely high paint holding capacity for powder paint.
- Easy to handle self-supporting design.
- Headered version also available.
- 99%+ efficient on powder paint overspray collection.
Expanded Paper
The AFT “Spray-Cube” extended surface cubes are the latest in AFT’s storied line of high efficiency spray booth filters. Each style of cube is designed to provide high holding capacity and an economical solution for the widest range of finishing applications. All cube filters are constructed of multiple layers of AFT’s proprietary paper paint arrestor media. Each cube features varying levels of high efficiency synthetic backings designed to provide durable, long-lasting paint arrestor performance.
Series SE, Medium Efficiency – High Holding Capacity
- Lowest initial pressure drop (0.02″ w.c.).
- Average removal efficiency of 98.8%.
- Widely used in high volume, medium efficiency applications.
Series HE, High Efficiency – High Holding Capacity
- Low pressure drop compared to other high efficiency overspray cubes (0.05″ w.c.).
- Average removal efficiency of 99.1%.
- Used in high volume applications that require higher than normal removal efficiency.
Series UE, Ultra High Efficiency – High Holding Capacity
- Extremely high removal efficiency over 99.5%.
- Low pressure drop for high efficiency (0.05″ w.c.).
- For high volume systems that utilize paints and coatings that are difficult to filter with standard filter products.